-69%
EPV
Occupancy Sensor BM3/24V/10 Stand alone - discontinued model
An occupancy sensor with a fixed delay time of 10 minutes, Occupancy sensing always active.
-6%
EPV
24V Occupancy Sensor PM/24V MASTER
Occupancy sensor with fixed delay time. Two variations available. Up to 12 meter installation height.
EPV
230V Occupancy Sensor PM/230V/5L
Small "Allround" occupancy sensor with adjustable delay time and adjustable twilight level switch. Perfect for retrofitting existing non-dimmable lighting. Superior sensitivity due to digiPIR technology. Made in Germany.
EPV
Occupancy Sensor ecos PM/230V
Occupancy sensing only (ON/OFF). The ecos PM/230V is the ideal sensor for applications without any daylight and applications where you want artificial light even if you have day light available. In two versions available. Up to 12 meter installation ...
EPV
Power Pack DALI
DALI Power Pack supports all 24V occupancy sensors. Requires one x 24V-MASTER sensor. With plug & play up to 30 SLAVES sensors for coverage extension are supported. Supports up to 45 DALI devices. 125 DALI devices may be supported with addional DALI ...
EPV
occy® smarthome 7m extension cable
4-core extension cable (jack plug to jack socket).
This increases the distance between the sensor head and the smarthome Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
This increases the distance between the sensor head and the smarthome Powerpack, e.g. if you prefer the Powerpack in close proximity to your control system.
-62%
EPV
Extension occupancy sensor ecos PM/24V/10 SLAVE - discontinued model
SLAVE sensor for coverage area extension of all 10 meter MASTER sensors.
EPV
Cable Adapter KA2 Set
Cable adapter to make the transition from RJ11 and RJ12) to installation cable or individual wires.
EPV
2-into-1 RJ12 Adapters
Used for plugging several 24V sensors together (MASTER / SLAVE) Rule of thumb: Typically 1 unit per SLAVE sensor required.
-1%
EPV
Occupancy Sensor ecos PM/24V/K DIM MASTER
An occupancy sensor that dimms the lights down when no one is present. With adjustable delay time. ("Corridor or Standby function"). Two variations available. Suitable for up to 12 meter installation height.
EPV
Occupancy Sensor ecos PM/230V/K DIM
An occupancy sensor that dimms the lights down when no one is present. With adjustable delay time. ("Corridor or Standby function"). Two variations available. Suitable for up to 12 meter installation height.
EPV
Extension occupancy sensor ecos PM/24V SLAVE
SLAVE sensor for coverage area extension of all EPV MASTER sensors. In two variations available. Up to 12 meter installation height.
EPV
6M RJ 12 Cable
6 meters RJ12 Cable for connecting several 24V sensors together 1-to-1 straight through cable 6P6C. 100% electrically tested.
EPV
Power Pack XL DIM
EPV Power Pack XL DIM with On/Off + daylight dimming, high-load relay output 2300VA / 800 A and 1-10V output. Supports all 24V occupancy sensors apart from the 24V/5Si.
EPV
Surface Mounting Enclosure
For surface installation if installation depth is insufficient or installation is not possible (e.g. exposed concrete ceilings).
36%
EPV
Spring clip
For the installation of occupancy sensors in suspended one-piece ceilings (drywall, acoustic ceilings), in which the standard mounting clip can not be used.
-0%
EPV
Occupancy Sensor ecos PM/230V/5LSa DIM
Integrated sensor for occupancy sensing and daylight dimming
-4%
EPV
230V Occupancy Sensor PM/230V/T
Occupancy sensor with adjustable delay time (no light sensor). This sensor reacts to presence - regardless of how bright the room is. In two variations available, up to 12 meter intallation height.
-0%
EPV
Occupancy Sensor PM/24V/L MASTER
An occupancy sensor with additional lightlevel switchoff. Delay time and twilight switch level are adjustable. In two variations available.